Location: Home > Services > Reliability Test, Evaluation and Analysis > Salt Spray Tests


Services

Salt Spray Tests

Using neutral salt spray tests we evaluate the corrosion resistence of parts and products containing metals or plating and coating films. We perform various repeated (compound) cycle tests such as salt spray tests to evaluate the extent of degradation as a result of desiccated atmospheric salt content for products in motion or automotive parts.


  • Salt spray tester

  • Salt water cycle tester
Equipment
Name Type Manufacturer Major Specification
Salt Spray Dust Tester SQ-800-ST Itabashi Rika Industries
  • Test categories:
    Corrosion tests of metals, platings and coatings
    according to ISO, JIS, MIL, etc. standards
  • Test tank inner size:
    800(W) x 600(D) x 500(H) cm
  • Test liquids:
    neutral 5% salt water
  • Spray amount:
    1 to 2 ML/80cm2/h
  • Test temperature:
    +35℃ constant
Salt Water Cycle Tester CY-90 Suga Test Instruments Co., Ltd.
  • Test categories:
    Equipment to test condition of salt spray, hot air
    drying, humidity, etc. in optional sequence cycles.
  • Test tank inner size:
    900(W) x 600(D) x 500(H) cm
    1. Salt spray test
      • Test liquid: neutral 5% salt water
      • Spray amount: 1 to 2 ML/80cm2/h
      • Test temperature: +35 to +50℃
    2. Dry test
      • Temperature: (RT+10℃) to +70℃
    3. Humidity test
      • Temperature: (RT+10℃) to +70℃
      • Humidity: 60 to 95%
    4. Open air infusion
      Approximate free air temperature

These 4 cycle tests can be performed in optional sequence

Top of this page